From: Gary Enzfelder
Sent: Monday, April 24, 2006 9:08 AM
Gentlemen, I installed the lakester headers w/inserts that you coated this past weekend and they look great!
Had a lot of positive comments.
Thanks for the great job, Gary Enzfelder 
HERE ARE A COUPLE OF PICTURES OF THE YOUR FOLKS WORK. EVERYBODY, WHO HAS SEEN THE CHASSIS, ASKS WHO DID THE COATINGS ON THE HEADERS? I AM ALSO GLAD TO HEAR ABOUT THE MIRROR BLACK POWDER COATING.
THE
CAR IS A 33 FORD ROADSTER. FRAME RAILS ARE FROM ALLOWAY, EVERTHING ELSE, I HAVE
DONE MYSELF. I WILL DEFINITELY BE SENDING MORE PARTS, POSSIBLY EVEN, ALL OF THE
EXHAUST
RICHARD
SHIRLEY
Harmon Head Oglethorpe, GA. 
Billy Kidd, Richmond,
VA 
Joe Spairana, Wynantskill, NY 
PUT MY HEADERS ON AND TESTED , IT LOOKS LIKE UR COATING IS GOING TO
WORK!!!!!!!!!!!!!! AFTER HAVING THEM COATED TWICE BY JET HOT AND THE COATING
BURNING OFF, WELL I WAS READY FOR THE SAME THING. WELL SO FAR SO GOOD GOT THE
ENGINE UP TO TEMP. THEN SAT IN THE DRIVE WAY AND HELD THE ENGINE @ 3000 RPMS FOR
A MIN. OR TWO LONG ENOUGH FOR THE HEADERS TO GET VERY HOT AND UR COATING SHOWS
NO SIGNS OF BURNING. THE JET HOT WOULD START TO COME OFF DOING THE SAME TEST.
>
> THANKS
> JOE SPAIRANA
> WYNANTSKILL,NY 12198
> E-MAIL:RODDER@HOTMAIL.COM
UPDATE Note:
"JUST WANTED TO UP DATE YOU GUYS ABOUT YOUR COATING ON MY HEADERS. I'VE PUT
SOME HARD MILES ON THEM WITH HIGH RPS, HIGHWAY AND CITY DRIVING GETTING THE
HEADERS VERY HOT!!!!!!!!! YOUR COATING IS STILL WORKING GREAT. THANKS FOR A
GREAT PRODUCT!!!!!!!!!!!!!!!!!!!!! JOE SPAIRANA " "10 Mar 2000"
Charlie Kaston, Charles City, VA Has two projects going.
Wait until you see his BIG BLOCK!
Bob Banks, Midlothian, VA '37 Ford. Dressed out from head to toe!
Doug
Hardee, Richmond, VA "40 Willys 
Chassis
fabrication as well as one off custom parts for this classy beast were performed
by Brett Hamilton of Hamilton enterprises. Brett and his modified are pictured on
our oval track page as well.
-----Original
Message-----
From: Steve Jones [mailto:sfjones.@prodigy.net]
Sent: Sunday, April 16, 2000 7:18
PM
To: webmaster@thermaltechcoatings.com
Subject: Header Coating
Hi,
I'm Steve Jones in Indianapolis. We met last October at the Goodguys in
Charlotte. Anyway I sent down my SB hugger headers to be recoated.
They really look great!!! I can't wait to get them back on my 37 Ford.
I'm changing motors right now so it will be a week or so. Enclosed is
a picture of one of the headers before and after. Quite a difference.
You can use the photo if you wish. I'll send more when the car is back
together.
Steve
Jones, Indianapolis 
-----Original Message----- 
From: Lacasse, Ron
Sent: Thursday, November 09, 2000 9:52 AM
To: 'webmaster@thermaltechcoatings.com'
Subject: Thanks
I can't wait
to get my headers back on my car. I have placed a nice message in your
guest book. I would be honored if you would place my cars on your street
rod page.
Attached is my 1929 Ford Roadster which is where the
headers came from. The other car will need some coatings from you as well.
As you can tell that is the wife's car it is a 1929 Mercedes Benz SSK.
Again thanks Ron
Lacasse
Wayne Piner Prince George,
VA 
