CERAMIC-METALLIC

"CERMAKROME" ®

At Thermal Tech we use only performance proven Thermal Barrier Coatings. It is a very durable ceramic reinforced coating available in a variety of colors. When properly applied it becomes the most effective thermal barrier coating available, increasing performance, while extending component life & has been tested to over 1300 degrees F without lifting, cracking or flaking. They have been specially designed to block heat or keep heat contained within an area. Keeping the heat inside an exhaust pipe until it reaches it’s exit point is the most effective way to lower under the hood temperatures allowing the engine to breath cooler air.

Unlike header wraps, it does not hold potentially damaging heat & moisture around the part. Rather, the surface temperatures are actually reduced, extending the life of the part. When cured, a very effective corrosion inhibiting film is formed that protects the part against oxidation and imparts excellent chemical resistance that further extends part life and enhances appearance.

It is extremely popular on exhaust systems, where the high luster finish provides a very attractive, durable surface for a cooler running system.

A satin aluminum finish is also available at the same cost for those who do not wish the polished look.

Thermal barriers may be applied to a variety of surfaces and metals, such as: exhaust system components, brackets, leaf and coil springs, valve covers, wheels, hinges, grills, suspension parts or any metal part that can withstand the 500 degrees Fahrenheit cure temperatures.

It is especially effective as a hard protective coating for aluminum parts that will be easy to keep clean and polished and it does not turn white from oxidation. 

And for those of you who have exhaust temps of 1300 to 2000 degrees Fahrenheit. Also it is an excellent coating for motorcycle exhaust.