Due to various part configurations, prices are estimates only! We reserve the right to modify prices or warranty upon part examination.
THERMAL BARRIERS
All of our prices are for coating inside and out with polished or satin aluminum finish!
Call for pricing!
Please no screws, bolts, nuts, washers or other small parts.
Prices are based on new or thoroughly cleaned parts.
Description PRICE
HEADERS
V8 Block Huggers (center dump) $150.00 pr.
V8 Short Length (under 24" longest length) $175.00 pr.
V8 Lakester Style, Not including down pipes. $200.00 pr.
V8 Full Length (under both 40" length & 2"D pipe) $250.00 pr.
V8 Extra Length (over 40" length & under 2"D) $250.00 pr.
V8 Full Length 4 or more pieces Multi-part $300.00 pr.
V8 Big Tube (under 40" & 2"D pipe & up) $275.00 pr.
V8 Big Tube Extra (over 40" & 2"D & up) $300.00 pr.
V8 Fender-well, Roadster or Dragster $300.00 pr
V8 ZOOMIES $250.00pr
V8 SB Stock Exhaust Manifold (Polished or Factory Gray) $150.00 pr.
V8 BB Stock Exhaust Manifold (Polished or Factory Gray) $200.00 pr.
6 Cylinder Full Length Header or Manifold $175.00 pr.
V6 (under 20" longest length and 2 pieces) $200.00 pr.
4 Cylinder Header (4 into 1) $150.00
4 Cylinder Manifold $80.00
Cobra w/side pipes (side pipes exterior only) $400.00 pr.
Race Boat Large diameter / Long tube $300.00 pr.
Marine risers V8's starting at $350.00 set
Straight pipe under 3" $15.00 per ft.
Straight pipe 3" and up $20.00 per ft.
Motorcycle pipes priced for twin cly. $125.00 pr.
Motorcycle "HOT STOP" for Chrome inside only $125.00 pr.
MOTORCYCLE 4 INTO 1 header $150.00
INTAKE MANIFOLDS
V8 Single or dual plane (aluminum) $100.00
V8 Single or dual plane (multi carb) (aluminum) $125.00
V8 Factory (cast iron) $150.00
V8 Tunnel Ram or air gap (single carb.) $100.00
V8 Tunnel Ram or air gap (single carb. 2 piece) $125.00
V8 Tunnel Ram or air gap (multi carb.) $125.00
V8 Tunnel Ram or air gap (multi carb. 2 piece) $140.00
V6 Aluminum Factory or after market (1 piece) $80.00
4 Cylinder factory or after market (1 piece) $50.00
MISCELLANEOUS ITEMS
Oil Pans Outside only. $80.00
Turbo Housing $45.00 & up
Rear End Housings max length less then 56" $200.00 & up
Valve cover, straight 4 or 6 cyl. $50.00
Valve cover, small block, aluminum $70.00 pr
Mufflers $50.00 & up
Individual parts are prices at $30.00 per sq. ft.
Due to the design of our thermal barriers, they provide a high luster finish that can be applied to virtually all metal part that you wish to show and shine or just to protect. (No magnesium or pot metal) Let your eye decide and your imagination guide.
Please keep in mind that we CAN'T get coating where there is no space between the metal, therefore these areas are subject to rust if the metal can rust. Also with used rusty parts there are places that the blasting media cannot reach to remove all the rust and the coating does not adhere to rust. Header designs with open and/or removable tubes and welded flanges can last a LIFETIME!
If you have an item that you feel will benefit from this coating, but it is not listed not listed, please contact us for pricing or technical support.
