Owned and operated by rodders with a commitment to quality!

Thermal Tech Coatings - appliers of high performance coatings for the motorsport industry. Exhaust header coatings and sales.

What Parts Should Be Coated?

Any part subject to heat damage, corrosion, friction or loss of lubricating film can benefit from hi performance coatings. In addition, enhanced appearance is possible for parts such as exhaust thermal coating headers, brackets and suspension pieces. Colors are also available.

How Much Power Will I Gain?

This will depend upon many factors that will vary from application to application. Testing has shown significant power increases on a dyno. Changes can be made in such areas as tolerances, timing, jetting and the lubricants used, that will increase torque and H.P. and are only possible through the use of coatings. Gains of up to 40 horsepower have been measured in independent dyno testing.

How Long Will The Coatings Last?

Depending on the coating, part life increases from two (2) to ten (10) times the normal part life can be obtained. Coatings such as "THERMAL BARRIER COAT" (exhaust header coating) can provide virtual lifetime protection against rust when applied to a new part. The dry film lubricants may burnish until they are no longer visible, however the active materials are bonded into the pores of the part and continue to provide protection.

Will I See A Temperature Change?

Parts will run cooler when coated with a thermal barrier (ceramic coating for exhaust systems), allowing engine oil and water temperatures to show a reduction. The radiated heat on headers will be substantially reduced leading to lower under hood temperatures and less heat absorption by nearby parts and surfaces. This is also a benefit for motorcycle exhaust coating to reduce the temperature rising towards the rider.

There are two different high-end temperature ratings for the thermal barrier coatings 1200 or 2000 Deg. F. NOS applications should use Turbo-X 2000 (only available in satin black color) in order to maintain exhaust component coating life. The thermal barrier coating provides approximately 25% - 30% barrier. 

Internal engine coatings

 If you are into the more serious side of racing or hot rodding we offer the best in piston rod coatings, ceramic piston coating, piston dry film lubricant as well as thermal dispersants. Check our products page for more info.

Powder Coating

We also apply automotive powder coatings for a durable finish that comes in a wide variety of colors as well as textures.